Metal Depots

Technical Info

Glossary of Terms

METAL ROOFING PRODUCTS

BUILDINGS

RESOURCES

ONLINE ORDERING

You will not have to concern yourself with wood rotting problems when you build one of these NCI Metal Depots metal building kits. These kits are available in a wide assortment of sizes, designed to meet your local building codes and the bolt-together design simplifies installation. By using a slope of greater than 2:12, you can take advantage of one of our many cool roof colors which can help reduce air pollutants and possibly help lower your utility costs. As with most metal buildings, you will enjoy the long life and low maintenance features. There will be three sets of erection drawings with each package and permit sealed drawings are available upon request.

	Two-Door Garage - 24´x 24´x 8´ • Two 9´x 7´framed openings in end wall • 4:12 roof pitch • 8´clear height (also available in 10´clear height) • 26-gauge painted Galvalume® or Galvalume Plus® roof
	Garage Workshop - 24´x 36´x 8´ • One 16´x 8´framed opening in end wall • 4:12 roof pitch • 8´clear height (also available in 10´clear height) • 26-gauge painted Galvalume® or Galvalume Plus® roof

Storage and Handling of Bundles

NOTICE: The bundle must be inspected and carrier advised immediately if damage is noted. If water is permitted to enter the bundle, it is necessary to open bundle, separate material and dry all surfaces.
Protect sheets while nestled in bundles:

Store bundled sheets off the ground sufficiently high to allow air circulation beneath bundle and to prevent rising water from entering the bundle. Slightly elevate one end of the bundle.
Prevent rain from entering bundle by covering with a tarpaulin, making provision for air circulation between draped edges of tarpaulin and the ground.
Prolonged storage of sheets in a bundle is not recommended. If conditions do not permit immediate erection, extra care should be taken to protect sheets from white rust or water marks.